Someone scratched my car’s left side panels including boot cover as shown in the picture. That is 5 panels, total cost of repairs would amount to 20,000₹. I wouldn’t spend above money for none of my fault. So thought why wouldn’t I try touching up my car after watching plenty of YouTube videos, if anything goes bad then I can give the car to a workshop. I had heard about the com-paints long time before so went through their Facebook page, they would provide Scratch solution(touch up paint spray can, varnish can, fast setting filler tube, wax tube, scraper, two sand paper pads) in a decent box. It costed me 685₹, without courier charges. Though the reviews weren’t so good. They make you select the touch up paint by year of make of your car, colour of shades available during the year of purchase etc. Well! Watch few videos com-paints sponsored videos but real deal is how well and how long you shake the paint-can so that metallic lustre and paint mixes( needless to say clean the area, cover other panels with news paper, closed space etc) as soon as filler is applied to the scratches it begans to dry fast, scrape the excess filler with the scraper(side with smooth edge facing the car panel) then you need to wait 2~3 minutes then start sanding the area, with filler in place, with super- fine sand paper with water till the face sanded gets smooth like rest of the panel. Clean the sanded panels with water and wipe them clean. Shake the can nicely atleast for 5 minutes, spray the paint on the panel from a distance 1 to 1.5 feet away with sweeping action. Two to three sweeps are sufficient then spray varnish two sweeps. The varnish will keep the metallic lustre in place and shine. Varnish is very important part of the procedure. Paint and varnish cans are just sufficient for approximately 4 square foot area, so it’s less. You can see the attached pictures before and after.